Always test a small inconspicuous area first to ensure easy-off is suitable for the intended application.
Spray, brush or wipe the surface with remover
Leave to react for 3-4 minutes whilst the remover penetrates the graffiti or stain
The thickness of the graffiti media will influence the amount of time required for the remover to work because it must migrate through the media
On very old graffiti, if required, agitate the surface with a briistle brush or green nylon pad soaked in remover (wear eye protection in case of splashes)
Rinse off with water to remove graffiti and to neutralise the surface
Allow surface to dry and repeat if necessary
Water deactivates easy-off - do not use remover on a damp or wet surface
easy-off graffiti remover (wipes)
Always test a small inconspicuous area first to ensure easy-off wipes are suitable for the intended application.
Peel back label, use as required on any hard surface to remove all ink, paint or dye based graffiti.
Dispose of used wipe in a bin and re-seal pack to keep wipes moist.
Once opened use within 3 months.
Water deactivates easy-off - do not use remover on a damp or wet surface.
